a1 revisions 0 plc 1 plc 2 plc 3 plc 4 plc angles of scale sheet rev name size cage code drawing no dimensions: tolerances unless otherwise specified: dwn chk apvd material finish product spec application spec weight p ltr date apvd dwn description loc dist 5 6 7 8 3 4 2 1 d b a a b c c d all rights reserved. released for publication c copyright this drawing is unpublished. 4805 (3/11) restricted to this drawing is a controlled document. te connectivity f revised per eco-13-002771 23feb2013 kh rp customer drawing 1934305 b.mcmaster 13jun2007 w.davis 13jun2007 w.davis 13jun2007 10:1 1 1 f - - - - - mm - - - - - - gp 00 header assembly, open ended, 4 pair 8 column tinman - 20 - - 20 00779 by - ref 1.425 ref 1.9 15.35 0.05 ref 2.4 ref 1.4 ref 2.5 4.50 0.15 typ 6.00 0.15 11.8 0.1 20.20 +0.10 -0.55 2.80 0.05 typ 1.9 ref 1.425 bsc ref 13.3 ref 0.625 ref 2.4 typ 1.4 ref 2.4 bsc ref 15.4 -x- -y- part number 1934305-1 material: contact - phos bronze housing - lcp, ul 94v-0, color - black finish: contact area finish conforms to the requirements of te product specification 108-2303; based on telcordia gr-1217-core for system quality level iii,applications in controlled environments (central office). compliant pin area- 0.5m min matte tin over 1.27m min nickel. connector marked with part number, date code and standard in approximate area shown datums and basic dimensions established by customer. 5. contact area lubricated with bellcore approved lubricant. technical reference gr-1217-core, issue 1, november 1995. reference application spec 114-13202 for recommended plated thru hole diameter and plating thicknesses. row l row k row j row i row h row g row f row e row d row c row b row a gold plating this side contact a1 contact a1 indicator = signal = ground recommended pc board layout backplane, component side shown scale 6:1 connector outline x y finished hole size and plated thru holes 1 2 3 4 6 1 2 3 4 4 4 4 6
|